I’m a great fan of Artograph and I’ve been using my Artograph DB300 for over 25 years. Alex Dow of Artograph Customer Services contacted me unexpectedly, as a result of one of my Artograph posts, and has generously posted links to my website, “Drawing from Line to Life” book, and my Starving Artists website on Artograph’s Facebook page. Thanks Alex!
It also reminded me that I have a Post-It note (one of many!) stuck to my monitor as a reminder to pass on the news about replacement bulbs. My DB300 use two 150 watt photofloods in screw-fitting holders. Although my bulbs very rarely fail (more about this later) one inevitably did and, of course, at just the wrong time. I Googled for a replacement only to find the screw-fitting version is no longer available. So I had to either find an alternative or source ceramic bayonet sockets to fit the available bulbs.
Fortuitously, as is often the case, I received an email from Lesley Brown who told me “It’s my husband who is the creative genius. Chris has been an illustrator for the past 30 years or so. I just get lovely jobs like searching for bulbs.” 🙂 She needed the bulb’s code number, which I know (Phillips Photocresenta PF 605 E/51), but I warned her about the availability problem. Within a short time Lesley replied to say she’d found a possible replacement. She says “I emailed the company who say they ‘use this product to replace the old Philips code P3-4 which was the PF605E’. And I have ordered a couple to try.”
I ordered a couple too, and they work! They’re halogen, so a little cheaper to run, indistinguishable from the old E/51’s light output, and – I’m getting ahead of myself here – they’re fully dimmable.
The link you need at Easy Lightbulbs is:
View Chris Brown’s amazing artwork: www.ChrisBrownArtist.com
and his excellent illustrations: www.ChrisBrownIllustrator.com
Lesley was pleased to report that the replacement halogen bulbs have a life of 2000 hours. That sounds good… but mine last for years! And here’s why…
I fitted my Artograph with twin dimmers because sometimes, if my source entirely covers the 10″ x 8″ copyboard, I need to reduce glare on one or even both sides. That glare can severely reduce visibility of crucial detail. For a while I would unscrew the bulb on the offending side, but that reduced the light output by a full 50%. The solution? I altered my DB300’s wring, and moved the on/off switch to make way for a pair of domestic lighting dimmers.
This allows me to control the lighting on one or both sides simultaneously. As a bonus, I always run both bulbs at 90% power – the reduction in light is barely noticeable and it greatly increases the lifespan of the bulbs. I’m also pleased to report that the dimmers work with the new halogen bulbs! I knew halogen bulbs are dimmable but I believed they needed dedicated dimmers – not so!
You can view and copy the original and modified wiring diagram here:
And I’m asked so often for details of the Artograph DB300 that I put together a PDF version of the manual. You can download a copy here:
If you make the modification, encounter any problems, or have installed any other interesting modification, I’d be delighted to hear from you.
Thanks again Alex. Thanks Lesley for finding the bulb source for us.